How to Change Code on Kwikset SmartCode 909? (2024)

November 15, 2023 by Mark

Do you need to change the code on your Kwikset SmartCode 909? Keep reading because I’m going to walk you through how to change the code in a few easy steps.

Understanding the Kwikset Smartcode 909

The Kwikset SmartCode 909 is a smart lock designed to provide you with keyless entry and enhanced security for your home.

This electronic door lock features a keypad that allows you to enter a user code to lock and unlock your door.

To begin, let’s explore the main components of the SmartCode 909:

• Smart Lock: The primary device that fits on your door and controls access.
• Keypad: The numeric keypad that allows you to enter user codes for keyless entry.
• Program Button: A button located on the interior side of the lock, used to program and modify user codes and the master code.
• Master Code: A unique code that grants you access to programming features and makes it possible to change user codes.
• User Codes: Up to eight individual codes that can be programmed into the lock, allowing each user to have their own unique code for entry.

When you decide to change the code on your Kwikset SmartCode 909, keep in mind that you may need to modify either the master code or specific user codes.

How to change user code

Follow these steps to change a user code:

1. Make sure your door is open during the programming process to avoid any accidental lockouts.
2. Locate the program button on the interior side of your lock.
3. Press and hold the program button until the keypad flashes green (about 5 seconds).
4. Enter the new user code you wish to use (it should be between 4 and 8 digits).
5. Press the lock button once.
6. Re-enter the new user code to confirm.
7. Press the lock button again, and if successful, the keypad will flash green, indicating that the new user code has been saved.

How to change the master code

Follow these steps to change the master code:

1. Keep your door open during this process.
2. Press and hold the program button until the keypad flashes green.
3. Enter the new master code (4 to 8 digits).
4. Press the lock button once.
5. Re-enter the new master code to confirm.
6. Press the lock button again, and if successful, the keypad will flash green, signaling that the new master code has been programmed.

Remember to always verify the new codes to ensure that they work correctly, and secure your home efficiently using the Kwikset SmartCode 909 electronic lock.

Programming the Kwikset Smartcode 909

Setting Up the Access Code

To set up a new access code on your Kwikset SmartCode 909, start by ensuring that the door is open:

1. Press and hold the Program button until the keypad flashes green (about 5 seconds).
2. Enter a new 4-digit user code.
3. Press the Lock button once.
4. Re-enter the 4-digit user code.
5. Press the Lock button once again.

If the setup is successful, the keypad will flash green with one beep. Your new access code is now programmed and ready to use.

Deleting and Resetting Codes

To delete an existing user code, you’ll need to override it by adding a different user code in the same position. For example, if you want to delete the third user code, simply add a new user code in position three.

If you need to perform a factory reset on your Kwikset lock, follow these steps:

1. Remove the lock’s battery cover and batteries.
2. Press and hold the Program button while reinserting the batteries.
3. Release the Program button once the batteries are in place.
4. Press the Lock button within 10 seconds of inserting the batteries.

Your lock is now reset to its factory settings, and all user codes have been deleted.

Managing the Master Code

To enable or change the master code, keep the door open and follow these instructions:

1. Press and hold the Program button until the keypad flashes green (about 5 seconds).
2. Enter a new master code.
3. Press the Lock button once.
4. Re-enter the master code.
5. Press the Lock button once again.

If programming is successful, the keypad will flash green with one beep. Your new master code is now active.

Enabling and Disabling Features

Your Kwikset SmartCode 909 might have additional features controlled by switch #3 on the lock’s interior. To enable or disable these features, simply toggle the switch to the desired position.

Remember to consult your lock’s user manual for specific instructions related to your model, as some features may vary.

Frequently Asked Questions